Page 1 of 1
		
			
				Head Size of Cuban Bongos
				
Posted: 
Wed Sep 17, 2014 3:26 pm 
				by Marcus
				In the Cuban youtube vids I have been watching I noticed that the Cuban bongos have a seemingly larger head sizes than virtually any Bongo sold in the US.  The hembra is about 9 inches or larger and in the US I see them stated at 8.5 inches.  Might be off in the exact measurement, however will someone please explain to me why the difference and why the US market has the smaller head size.
peace, marcus
			 
			
		
			
				Re: Head Size of Cuban Bongos
				
Posted: 
Thu Sep 18, 2014 5:24 pm 
				by caballoballo
				Saludos, all mass produce manufacturers have a model with a 9" hembra Lp has 2,toca 1,meinl 2. With boutique type bongó it is your choice for them to make it to your specs. Anyway a bigger Hembra does not necessarily means better sound. As Cali from Jcr told me once, the correct skin would make a smaller hembra sound as good or better than a 9". In my experience I found that to be true.
			 
			
		
			
				Re: Head Size of Cuban Bongos
				
Posted: 
Fri Sep 19, 2014 2:14 pm 
				by Marcus
				Hey Caballoballo,
thanks for the response.  Just doing some research here.  
peace, Marcus
			 
			
		
			
				Re: Head Size of Cuban Bongos
				
Posted: 
Thu Oct 09, 2014 1:16 pm 
				by El Magnifico
				caballoballo wrote:Saludos, all mass produce manufacturers have a model with a 9" hembra Lp has 2,toca 1,meinl 2. With boutique type bongó it is your choice for them to make it to your specs. Anyway a bigger Hembra does not necessarily means better sound. As Cali from Jcr told me once, the correct skin would make a smaller hembra sound as good or better than a 9". In my experience I found that to be true.
That's right, Josean. My Timba has a 9" hembra and in order to avoid the sound to be like a "caja de cartón" I installed a conga head. The sound of a 9" is not necessarily better, but it's fuller and the volume is higher. I mainly use this set for "alive" jigs.
Saludos!
 
			 
			
		
			
				Re: Head Size of Cuban Bongos
				
Posted: 
Mon Oct 27, 2014 4:58 pm 
				by Raymond
				Nothing official about this but what I've read and heard, is that the original Cuban design for bongos was 7 macho drum and 9 hembra drum.  However, the first popular mass produced brand, Latin Percussion or LP, made the macho drum 7 1/4 and the hembra 8 3/4.  Since they became so popular, practically every mass produced company went the same sizes.   However, during the last decade there has been a comeback to the 7 and 9 sizes in some models by some companies.  The 7 1/4 and 8 5/8 is the most common and most popular size.  Regarding sound, it is true the head, thicker or thinner heads, of a bongo is an item very important in the sound.  Tuning is another aspect.    
The most common modern tuning in Iatin music people tend to go for sharper macho and deeper bass sound.  Therefore, conventional wisdom tells you that a smaller drum will give you a sharper sound and a bigger drum will give a deeper sound.